Skip to content
- scale length: 24.9″
- top: Tempered AAA Adirondack Spruce
- back & side: Ziricote
- body
- low bout: 15 1/4″
- depth: 4″ at end block, 3 3/4″ at neck block
- Manzer Wedge: 4 3/4″(treble), 3 1/2“(bass)
- binding: figured Koa with BWB strip
- back strip: none
- bevel: arm bevel, knee bevel, rib bevel, cutaway bevel (figured Koa)
- strap button next to neck on side
- cutaway: Florentine (sharp cutaway)
- rosette ring: figure Mahogany, Paua Abalon with BWB
- neck
- Birdseye Tempered Maple two piece neck
- tuner: GGM6CSMB tuner, chrome w/black plastic button, 3L/3R, 18:1 510 mini
- Talus angled neck joint, 14fret joint
- Mortise & Tenon bolt-on
- ( Cumpiano’s hardware-based neck joint, Hex Key:(5/32,9/64))
- Double Graphite Rod reinforcement
- Two-Way Truss Rod , Hex Key: 4 mm (5/32″)
- fingerboard
- Ziricote, round-off tongue
- binding: figured Koa with Maple Strip
- inlay: Maple position dots
- Bass Side frets 3, 5, 7 ,9,
- 12 Fret bass & treble
- Treble side frets 15, 17, 19
- Number of frets: 22
- fret wire: StewMac #150, 18% nickel/silver(zero fret: stainless steel)
- neck profile: symmtrical
- head stock
-
headstock overlay:
- top: Ziricote
- back: Ziricote
- headstock binding: figured Koa with maple strip
- decal: “y ” , mother of pearl
- bridge:
- Ziricote
- bridge pin: Ebony
- end wedge, heel cap: figured Koa
- sound port: none
- nut & saddle
- 1/4″thick bone nut wit zero fret
- nut width: 1 3/4″
- string spacing at bridge: 2 3/8″
- fingerboard width at 12th fret: TBD
- saddle : 1/8″ thick
- finish:
- body: Mohawk Nitrocellulose Gloss lacquer/Vinyl sealer
- fingerboard, back of neck & heel: Tung Oil
- string: Custom Light Elixir Polyweb 11-52
- Electronics: LR Baggs Anthem StagePro mounted on lower bout
- Hard Shell Case: Hiscox PRO-II 000/OM
Like this:
Like Loading...
yamamotoguitar