#191 Talus VL14-Deep Paulownia/Maple

 

  • scale length: 25.5″
  • top:        Paulownia
  • back & side:   Quited Maple
  • body
    • low bout:   15 1/4″
    • depth:     4 3/8″ at end block
    • Manzer Wedge: 3 13/16″(bass)  5″-(treble)
    • binding:    Figured Koa with Bw
    • back strip: none: Figured Koa with BW
    • bevel:     arm bevel, knee bevel, rib bevel  (Figured Koa)
  • cutaway:  Venetian(round cutaway)
  • rosette ring:      figure Mahogany, Paua Abalone with BWB
  • neck
    • BirdsEye Maple three piece
    • tuner:   GGM6CSMB chrome w/black plastic button, 3L/3R, 18:1 510 mini style
    • side dot: white plastic
    • Talus angled neck joint, 14fret joint(bass side)
    • Mortise & Tenon bolt-on
    • ( Cumpiano’s hardware-based neck joint, Hex Key:(5/32,9/64))
    • Double Graphite Rod reinforcement
    • Two-Way Truss Rod (Hex Key:9/64)
    • fingerboard
      • Macassar Ebony, round off tongue
      • binding:        Ebony with Maple Strip
      • inlay: non
      • fret wire:        StewMac #149, 18% nickel/silver, titebond
  • head stock
    • headstock overlay:
      • top:  Cocobolo
      • back: Ebony
    • headstock binding:    Ebony with maple strip
    • decal:        “y ” , MOP
  • bridge:
    • Ebony
    • bridge pin:        Ebony
  • end wedge, heel cap:        Figured Koa
  • sound port:  none
  • nut & saddle
    • bone
    • traditional nut
    • 1/4″thick
    • nut width: 1 3/4″ + 1/64″
    • string spacing at bridge:  3 5/16″    
    • fingerboard width at 12th fret: 2 1/4″
    • saddle :        1/8″ thick
  • finish:        Mohawk Nitrocellulose Gloss lacquer
  • string:   light gauge
  • Hard Shell Case: Hiscox PRO-II 000/OM

3.7, 2.6, 2.8mm